| Disable Functions: Path : /etc/ipmi/ |
| Current File : //etc/ipmi/lan.conf |
# lan.conf
# A configuration file for lanserv or ipmi_sim to configure the various
# communication parameters for the device.
# This is a name used to identify this instance, and used to create
# the default name of the emulator startup command file and eventually
# the storage facility for permanent storage.
name "ipmisim1"
#
# Work on the BMC first
set_working_mc 0x20
# Define a LAN channel on channel 1
startlan 1
# Define an IP address and port to listen on. You can define more
# than one address/port to listen on multiple addresses. The ::
# listens on all addresses.
addr localhost 9001
#addr 192.168.27.126 9000
#addr 192.168.27.200 9000
# Maximum privilege limit on the channel.
priv_limit admin
# Allowed IPMI 1.5 authorization types
allowed_auths_callback none md2 md5 straight
allowed_auths_user none md2 md5 straight
allowed_auths_operator none md2 md5 straight
allowed_auths_admin none md2 md5 straight
# guid for IPMI 2.0 authorization You can also use a string
guid a123456789abcdefa123456789abcdef
#guid "I_AM_A_REAL_BMC!"
# You can specify a BMC key for IPMI 2.0 authorization. See the
# spec for details.
#bmc_key "abcdefghijklmnopqrst"
# A program to get and set the LAN configuration of the interface.
#lan_config_program "/usr/local/bin/ipmi_sim_lancontrol eth0"
lan_config_program "./ipmi_sim_lancontrol eth1"
endlan
#chassis_control "./ipmi_sim_chassiscontrol 0x20"
# Define a serial VM inteface for channel 15 (the system interface) on
# port 9002, just available to the local system (localhost).
serial 15 localhost 9002 codec VM
# startcmd is what to execute to start a VM associated with the
# codec above (localhost 9002). It also starts a console serial port
# on port 9003 that is also used as the monitor interface.
startcmd "qemu-system-x86_64 --enable-kvm -drive file=/opt/qemu/cge-complete-image-x86-generic-64-1.ext2,format=raw -nographic -kernel /opt/qemu/bzImage-1 -append 'root=/dev/sdb console=ttyS0,115200' -net nic,model=e1000,macaddr=52:54:00:12:34:59 -net user,hostfwd=tcp::5556-10.0.2.15:22 -chardev socket,id=ipmi0,host=localhost,port=9002,reconnect=10 -device ipmi-bmc-extern,id=bmc0,chardev=ipmi0 -device isa-ipmi-bt,bmc=bmc0 -serial mon:telnet::9003,server,telnet,nowait"
sol "telnet:localhost:9003" 115200
# Start startcmd at startup? Default is false.
startnow false
# The amount of time to wait for the startcmd to do a power off
# on a powerdown request. The simulator will send a request to the
# target, wait this amount of time, and then do a SIGTERM kill on the
# process. If this is zero, a SIGTERM will not be done (nor will a SIGKILL).
# Note that if the simulator does not have a connection to the VM, the
# graceful shutdown is skipped and a SIGTERM is done immediately.
# Default time is 60 seconds.
#poweroff_wait 30
# The amount of time to wait for SIGTERM to kill the process. If the process
# does not terminate in this period of time, send a SIGKILL kill. If this
# is zero, don't send the SIGKILL. Default time is 20 seconds.
#kill_wait 5
# Now add some users. User 0 is invalid, user 1 is the special "anonymous"
# user and cannot take a username. Note that the users here are only
# used if the persistent user config doesn't exist.
# # valid name passw priv-lim max-sess allowed-auths (ignored)
user 1 true "" "test" user 10 none md2 md5 straight
user 2 true "ipmiusr" "test" admin 10 none md2 md5 straight
# sol "/dev/ttyUSB0" 38400 history=4000 historyfru=10
#
# Switch to a new MC
#
set_working_mc 0x30
# Add a SOL config, a device and a default baud rate.
# "history" sets a history buffer size. This means that DCD and CTS will
# always be enabled to the device, and we will constantly collect
# history for the device. It will be available as SOL instance 2
# on the device. If the optional backupfile option is specified,
# the history data is stored in the given file if the BMC shuts down
# (or is killed by a catchable signal) and restored from that file if it
# starts up.
# If historyfru=N is specified, then FRU device N on the MC will be
# able to fetch the contents of the history buffer, too, up to
# 65535 bytes (the max size of FRU data).
# Specifying nortscts disabled rtscts on the port. It will still change
# the RTS output line, but it won't listen to CTS.
# Normally the data is left in the history buffer when read. If
# you want the history data to be cleared from the buffer on read
# add readclear.
#sol "/dev/ttyUSB0" 19200 nortscts readclear
# sol "/dev/ttyUSB0" 38400 history=4000,backupfile=/var/ipmi_sim/solhist1 historyfru=10
# Define a serial VM inteface for channel 15 (the system interface) on
# port 9003 for the MC at 0x30
serial 15 localhost 9012 codec VM
startcmd "qemu-system-x86_64 --enable-kvm -drive file=/opt/qemu/cge-complete-image-x86-generic-64-2.ext2,format=raw -nographic -kernel /opt/qemu/bzImage-2 -append 'root=/dev/sdb console=ttyS0,115200' -net nic,model=e1000,macaddr=52:54:00:12:34:59 -net user,hostfwd=tcp::5557-10.0.2.15:22 -chardev socket,id=ipmi0,host=localhost,port=9012,reconnect=10 -device ipmi-bmc-extern,id=bmc0,chardev=ipmi0 -device isa-ipmi-kcs,bmc=bmc0,irq=5 -serial mon:tcp::9013,server,telnet,nowait"
sol "telnet:localhost:9013" 115200
# Start startcmd at startup? Default is false.
startnow false
# Allow a console connection to perform emulation commands.
#console localhost 9000
# Dynamically load a module to extend the simulator. After the module is
# loaded, if the function "ipmi_sim_module_init" is defined in the module,
# it will be called with the following parameters:
# int ipmi_sim_module_init(sys_data_t *sys, char *initstr);
# where initstr is the init string passed on the module load line.
# It should return 0 on success or an errno no failure.
#loadlib "/opt/lib/ipmi_sim_extend.so" "Initialization String"